Spencer Western Explosive Powder Actuated Tool JD301 - Tool Market
Spencer Western Explosive Powder Actuated Tool JD301 - Tool Market
Spencer Western Explosive Powder Actuated Tool JD301 - Tool Market
Spencer Western Explosive Powder Actuated Tool JD301 - Tool Market

Spencer Western Explosive Powder Actuated Tool JD301

$298.95
Or 4 payments of $74.73 with
Buy Now, Pay Later
$298.95
Was:
You save: $-298.95 (Liquid error (snippets/product-page-price line 52): divided by 0%)
Or 4 payments of $74.73 with
Buy Now, Pay Later
Vendor: Spencer Western
SKU: TM-SW-JD301
Availability: Out Of Stock
Buy Now, Pay Later
  • afterpay
  • paypal
Spencer Western Explosive Powder Actuated Tool JD301 - Tool Market

Spencer Western Explosive Powder Actuated Tool JD301

$298.95

Spencer Western Explosive Powder Actuated Tool JD301

$298.95

Powder Actuated Tool with Case

Features & Benefits

  • Reliable design, 0.27 Calibre strip loads
  • Operator comfort from cushioned grip and reduced recoil
  • Sound dampening muffler for quiet operation
  • High quality semi-automatic and fast-cycling fastening
  • Safe to handle — tool requires compression against work surface for trigger to be actuated
  • Easy disassembly for cleaning and maintenance
  • Applications
  • Electrical Applications
  • Plumbing Applications
  • Framing members
  • Bottom Plates
  • Powder-Actuated Fastening
  • Fastening to Structural Steel
  • Direct Fastening
  • Fastening to Concrete
  • Cold-Formed Steel
  • General Safety

To avoid serious injury or death:

ALWAYS make sure that the operator and bystanders wear safety glasses. Hearing and head protection are also recommended.
ALWAYS post warning signs when gas- or powder-actuated tools are in use. Signs should state "Tool in Use" and should be posted within the area where the tool is being used.
ALWAYS store gas-and powder-actuated tools unloaded. Tools and powder loads should be stored in a locked container out of the reach of children.
NEVER place any part of your body over the front muzzle of the tool even if no fastener is present. The fastener, pin or tool piston can cause serious injury or death in the event of an accidental discharge.
NEVER transport fasteners or other hard objects in the same pocket or container with powder loads or fuel cells. These objects may strike the energy source, or puncture the fuel cell, thereby igniting and causing serious injury or death.
NEVER attempt to bypass or circumvent any of the safety features on a powder- or a gas-actuated tool.
ALWAYS keep the tool pointed in a safe direction.
ALWAYS keep your finger off the trigger.
ALWAYS keep the tool unloaded until ready to use.
ALWAYS stay alert, watch what you are doing and use common sense when operating. Do not use while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating may result in serious personal injury.
ALWAYS maintain tool with care, and keep tool clean.
Installation Safety


To avoid serious injury or death:

ALWAYS hold the tool perpendicular (90°) to the fastening surface to prevent ricocheting fasteners. Use the spall guard whenever possible.
NEVER attempt to fasten into soft, thin, brittle or very hard materials such as drywall, light gauge steel, glass, tile or cast iron as these materials are inappropriate. Conduct a pre-punch test to determine base material adequacy.
NEVER attempt to fasten into soft material like wood or drywall (fastening through soft materials into an appropriate base material may be allowed if the application is appropriate).
NEVER attempt to fasten to a spalled, cracked, or uneven surface.
Re-driving of pins is not recommended.

    Specifications:

    Model Number JD301
    Power Source Powder-Actuated
    Fastener Length 12.7mm to 63.5mm (1/2" thru 2 1/2" )
    Firing Action Semi-automatic 
    Load Caliber .27 strip loads, brown thru red (Levels 2-5)
    Length 340mm
    Weight 2.4Kgs
    Capacity Single nails
    Drive Pins YD/HYD/PD/HPD/M8/HM8

    Recently Viewed Products